The Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify samples in 0.5 - 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process.

If you need 230 volt unit, please select the models that end in EUR. Four different probe sizes are avaliable - the 04, 07, XL, and 14. Unlike most other Brands of rotor-stator homogenizer, THE TISSUE-TEAROR COMES COMPLETE WITH BOTH THE HIGH-SPEED MOTOR AND ONE STAINLESS STEEL PROBE OF YOUR CHOICE. See chart below for selection guidance. Additional probes are available. All are interchangeable with the TT motor unit.

  • 用来混合,乳化,切碎

    用于少量样品

    方便拿取,单手可操作。也可以固定在铁架台上

    耐热耐压的不锈钢探头

    所有的探头都是可更换的以及很容易取下来清洗

    高速马达,速度为5000-35000RPM

  • 用来混合,乳化,切碎

    用于少量样品

    方便拿取,单手可操作。也可以固定在铁架台上

    耐热耐压的不锈钢探头

    所有的探头都是可更换的以及很容易取下来清洗

    高速马达,速度为5000-35000RPM

  • Product Description


  • Tissue Tearor ProbesDuring operation, the suspended material is drawn into the bottom centimeter of the homogenizer probe by an internal rotor turning at 32,000 rpm. The material is repeatedly cycled through narrow slits located in the outer part of the probe where it is rapidly sheared and disintegrated by high frequency, mechanical action.  Little if any heat is formed in the homogenization process and probe clean up between samples is simple and fast.   An advantage if the objective is to isolate viable microorganisms from tissue or feces, rotor-stator type homogenizers will not disrupt most bacteria or yeast.

  • Catalog NumberPractical Working Range (ml)Probe Diameter (mm)Working Probe Length (cm)
    985370-040.5-5.04.54.8
    985370-071-5078.3
    985370-145-10001413.2
    985370-XL1-50 (use w. 50ml tubes)710.9
  • * Dimensions taken from stator.